Pyle Ceiling Audio system – Stereo House Theater Audio system – in Wall Audio system Flush Mount – 8-Inch White 250 Watt, 2-Method, (Pair) (PDIC86)
PyleHome Mannequin : PDIC86 8.0” House In-Wall / Ceiling Audio system 8.0” In-Wall / In-Ceiling Twin Stereo Audio system, 2-Method Flush Mount (250 Watt) Options: In-Wall / In-Ceiling System 2-Method Stereo Sound Audio system Consists of (2) 8.0-inch Audio system 1/2” Excessive Compliance Polymer Tweeter Polypropylene Cone with Rubber Edge Mounts Flush on Partitions or Ceilings Constructed-in Digital Crossover Community Nature Pleasant ABS Development Good for Customized Installations & Purposes Consists of Changeable Spherical & Sq. Stain Resistant Grills Reduce-Out Template for Simple Set up
What’s within the Field: (2) 8” -inch Wall Audio system (2) Spherical Speaker Grills (2) Sq. Speaker Grills
Technical Specs: 250 Watt Rated Peak Energy Impedance: 8 Ohms Sensitivity: 89 dB Frequency Response: 40Hz-20kHz Complete Unit Dimensions (Diameter x Depth): 11.3” x 3.9” -inches Cutout Diameter: 9.4”, Cutout Mounting Depth: 3.6” -inches Bought as: Pair Weight: 9.91 lbs. The Pyle PDIC86 two-way twin audio system ship stereo sound to any room in your house or workplace with out cluttering ground area. Every unit within the pair measures 8.0” diameter and are available outfitted with .5” excessive compliance polymer tweeter for a full, wealthy sound. Audio system are made from nature pleasant ABS materials and embrace stain resistant grills. System comes with changeable spherical and sq. grill covers and cut-out template for simple and fast set up. They mount flush for a clear look on partitions or ceilings. Obtain extra wide-ranged sound efficiency and add audio to any room with the PDIC Twin Stereo Speaker Programs.
House Audio Energy Amplifier System – 2X40W Mini Twin Channel Mixer Sound Stereo Receiver Field w/ AUX, Mic Enter – For Amplified Audio system, PA, CD Participant, Theater by way of RCA, Studio Use – Pyle PTA2
Entrance View
Click on right here for a bigger picture Connection Diagram
Click on right here for a bigger picture Stereo Energy Amplifier
Click on right here for a bigger picture Again View
Click on right here for a bigger picture The Final Stereo Energy Amplifier This amplifier provides you the ability and flexibility you have to create an expert sound system. Its large frequency response makes it appropriate for amplifying any kind of audio together with music or vocals. It may be utilized in assembly halls, eating places, faculties, shops, and at residence –the good resolution for paging programs anyplace. Get the ability you want with 2 x 40 Watt to deal with all of your audio wants. Switchable Mixing (Karaoke) Mode When set to ‘mixing’ the alerts from AUX1, AUX2, CD, & MIC will exist on the similar time and works nice for making a karaoke occasion. Your music will play out of your chosen audio supply and it is possible for you to to sing by way of a linked microphone. (Microphone not included) Switchable MIC Pager Mode When set to ‘pager’ the sign from AUX1, AUX2, & CD will likely be attenuated by -10dB and the sign from MIC will override to web page (Auto Talkover) and makes for an distinctive paging system. L/R Speaker Terminals Allows you to simply join speaker wires on to the amplifier. The speaker impedance might be ranged from 4 to eight Ohms for the overall stereo output. The entire speaker impedance should be at the least 4 Ohm per channel at stereo mode. 110/220 Voltage Selector This amplifier has selectable enter voltage from 110 V/60 Hz (the usual in USA and Canada) to 220 V/50 Hz (for European operation). Please make certain the swap is within the correct place earlier than working. 1/4-Inch Telephone Jack Accepts headphones with 1/4-inch plugs. 1/4-Inch Microphone Enter Jack Accepts microphones with 1/4-inch plugs. REC RCA Output Allows you to join the amplifier to a tape deck for recording. Take Management Use the management middle panel situated on the face of the unit to make changes to microphone quantity, grasp quantity, steadiness, bass, and treble Replaceable Energy Fuse The amplifier makes use of a fuse for cover in opposition to surges and brief circuit. If the amplifier instantly turns off and won’t activate, test the fuse, and substitute it if vital. (Substitute fuse to make use of: 1.5-amp, 250-volt, fast-acting .2 x .8 inches fuse -not included) Extra Options Harmonic Distortion: 0.3% 2 x 40 Watt RMS at 4 Ohm Blue LED Output Degree Show Frequency Response: 20 Hz-20 kHz Energy Fuse: 1.5 A, 250 V Quick-Appearing (.2 x .8 inches) Energy Requirement: 120 V AC 60 Hz/230 V AC 50 Hz Tone Controls: Bass & Treble: +/-10 dB (100 Hz/10 kHz) Dimensions: 7.48 x 2.75 x 5.39 inches
PyleHome Mannequin: PTA2Compact House Audio Stereo Energy Amplifier, 2 x 40 WattMini Desktop Audio Amplifier with AUX, CD & Mic Inputs RCA REC Output Stability Management 1/4″ Mic Enter Jack Energy On LED Indicator Headphone Output Jack 110/220 Voltage Selector2 X 40 Watt Max At 4-Ohm 4 Push Kind Speaker L/R Terminals Switchable Mic Pager And Mixing Modes Switchable RCA Inputs: AUX1, AUX2 & CD Bass, Treble, Grasp Quantity & Mic ControlsDimensions: 7.48”W x 2.76”H x 5.39”DPyle Professional’s PTA2 combines the usefulness of a small, take-anywhere amplifier with a full featured mixer. Three stereo line-level inputs and a 1/4″ microphone enter are supplied for supply connection and mixing. A pager swap gives supply attenuation for microphone precedence. Stereo recording is made doable by the built-in line-level outputs. Stability, tone, speaker quantity, microphone quantity, energy, and supply choice controls are front-mounted for fast adjustment
Product 1: FLUSH MOUNT DESIGN: A pair of flush mount design midbass speaker for easy and simple in-wall / in-ceiling set up. The product consists of the cutout dimension at 9.4” in diameter x 3.6” in depth and environmentally pleasant ABS building
Product 1: 40Hz – 20kHz FREQUENCY RESPONSE: Pyle 8.0” speaker system has a 1/2’’ polymer tweeter and frequency response. This flush mount speaker is pack with distinctive 8 ohm impedance ranking and spectacular 250 watts energy dealing with functionality
Product 1: 250 WATTS PEAK: Pyle in-wall speaker system have been fastidiously mixed to breed sound clearly with excellent responsiveness. It might probably obtain wide-ranged sound efficiency audio system safe in addition to extending the lifetime of the product
Product 2: Output Wattage: 80
Product 2: Included Parts: 1 Pyle-House Branded Product
